Skip to main content

NBFM & WBFM (Narrow band frequency modulation & Wide band frequency modulation) simple explanation. By Yuvi - Study Point

Hey everyone, today we are going to learn about NBFM & WBFM (Narrowband frequency modulation & Wideband frequency modulation) in simple or easy way.
So, without wasting any time lets get started.

The information about NBFM & WBFM
  • When the spectrum's efficiency is important or it is required then we use NBFM (Narrowband frequency modulation) is used. 
  • But when better signal quality is required or when it is important then we use WBFM (Wideband frequency modulation).
  • The term NBFM is used for those applications where the modulation index is less than or equal to 1.
  • And the term WBFM is used for those applications where the modulation index is greater than or equal to 1.
  • Now, let's see more difference between Narrow band frequency modulation(NBFM) and Wideband frequency modulation(WBFM).
  • The term narrow-band and wide-band refer to the actual radio channel bandwidth.
The purpose or advantage of using NBFM (Narrowband frequency modulation)
  • The purpose or advantage of using a narrow channel is that the bandwidth of noise in a narrow channel is less and due to this, the sensitivity becomes better and range also becomes better.
The benefits or advantages of using a wide channel or WBFM (Wideband frequency modulation)
  • And the benefits or advantage of using a WBFM (Wideband frequency modulation) is that it can transfer or we can say that it has the capability to transfer higher data rates which means in very less time it can transfer more data. 
Where to use Narrowband frequency modulation & Wideband frequency modulation is used?
  • Narrowband frequency modulation is used in voice communication in commercials and it is also used in radio settings, etc.
  • And in broadcast services where audio fidelity is important, their Wideband frequency modulation is used.   
{ If you guys want a further brief explanation with single tone expression of both NBFM(Narrowband frequency modulation) & WBFM(Wideband frequency modulation) then please go and check out my video which is given below and also check out my channel. The video link is also given below. }



https://youtu.be/NIfRYWGBAR8

Thank you!

Comments

Post a Comment

Popular posts from this blog

RVDT (Rotary variable differential transformer or transducer) simple explanation. By Yuvi - Study Point

Hey everyone, today we are going to simply learn about RVDT (Rotary variable differential transformer). So, without wasting any time lets get started. RVDT is a passive transducer which means it requires an external power source. Its designing is same as like LVDT (Linear variable differential transformer o transducer) but the main dissimilarity is that RVDT has a cam-type core or we can say rotary ferromagnetic core which means the shape of the core is different because LVDT consists or employs flexible iron core for displacement.   And by the help of shaft, this core will turn or rotate among the two windings of the transformer. The shape of an RVDT is cam-shaped. Three conditions which occur is RVDT is ~ *when the core or shaft is placed at the null position then the induced e.m.f in secondary windings are similar as well as revers in phase. E0 = E1- E2 = 0 *When the core rotates in a clockwise direction, in this the more section of the core will enter ...
Post a Comment
Read more

Corona effect in transmission lines.| Explanation by Yuvi - Study Point

You all have heard about the Corona effect in transmission lines, now understand it in a simple way. This effect is a phenomenon which is associated with all transmission lines. At certain conditions, the electric field closer or near the energized conductors or components produces a tiny electric discharge or we can say corona which causes the surrounding air to ionize. And due to this ionization of surrounding air molecules of conductors, a luminous glow with hissing noise is produced which is known as Corona effect. Between the transmission lines, air act as a dielectric medium or we can say that air act as an insulator between current-carrying conductors. Between the conductors, voltage induces and if this voltage is of alternating nature then charging current will flow between the conductors. And the voltage of this transmission line and electric field intensity increases because of this charging conductor. There is a predetermined value of the electric field inten...
Post a Comment
Read more